29
139435_A GZ
455
DV 8/28/12
Remote Transmitter Controls, cont’d.
Temperature Indication Display
With the transmitter in the OFF position, press the
Thermostat Key and the Mode Key at the same
time. The display screen will show the current
room temperature cycling between Fahrenheit and
Celsius indicators each time the keys are pressed
simultaneously. See fig. 7.4.
Turn on the Burner
Press the ON/OFF Key on the Transmitter.
The display will show all the active icons. At the
same time, the Receiver will activate the Pilot
Ignitor. First the pilot will ignite, followed shortly
by the burner. A single” beep” from the Receiver will
confirm reception of the command.
Turn off the Burner
Press the ON/OFF Key. The display will show only
the room temperature and icon. At the same time,
the Receiver will deactivate the call for heat and the
burner will shut down. Fig. 7.5. A single”beep” from
the Receiver will confirm reception of the command.
Remote Burner Control
There are six flame levels available.
With the system ON, and the burner flame level
at maximum, press the Down Arrow Key once to
reduce the flame height by one step. Each time the
Down Key is pressed, the flame will step down until
the burner is finally turned off. Fig. 7.6.
The Up Arrow Key will increase the flame height
each time it is pressed. If the U Arrow Key is pressed
while the system is on but the flame is off, the
flame will come on in the High position. Figs. 7.7- 7.9.
A single “beep” will confirm reception of the com
-
mand.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room themostat.
The themostat can be set to a desired temperature to
control the comfort level in a room.
To activate this function, press the Thermostat Key,
(Fig. 7.2) The display will indicate that the room
thermostat is “ON” and the current Set Temperature
is now displayed. Fig. 7.10.
To adjust the Set Temperature, press the Up or
Down Arrow Keys until the desired Set Temperature
is displayed. Fig. 7.11.
Figure 7.4. Room temperature readings
Figure 7.5. Burner shut-down
Figure 7.7. Flame Level 1.
Figure 7.6. Burner OFF.
Figure 7.8. Flame Level 7.8.
Figure 7.9. Flame Level 7.9.
Figure 7.10. Thermostat ON
Figure 7.11.
Change Set Temperature
Room Temperature
Set Temperature
