ATOS Worldline
-
Technologies & Products
Page:
31/55
DEP/T6 Owner's Manual
(
04.01
)
Classification:
Public
It i s impo rt ant th at t he p erson that p erforms this part of th e s ystem
set -up is aware o f th e n et wo rk t echnology an d p oli ci es u sed i n his
env iro nm ent.
To set the IP-addresses of the two Ethernet ports, navigate to the
IP-addresses
menu.
The path to follow is:
System Configuration
> (Identification) >
System Setting
>
IP
Addresses.
IP Addresses
1 IP 1 Setup
2 IP 2 Setup
3 Up
Ok
4.2.5.1. Selecting an interface
Select the Ethernet interface for which you want to provide or change the set-up. Press
Ok
to confirm. Since the settings are identical for both ports, the procedure to set the
IP-related parameters is also identical.
The picture below shows a sample menu containing all the settings for the IP-set-up.
IP
x
Setup
1 DHCP
2 IP Address
3 Subnet Mask
4 Gateway
5 Up
4.2.5.2. Setting up DHCP
DHCP
is enabled by default. To change it, navigate to the
DHCP
options menu and
select
Disable
.
Press
Ok
to confirm.
DHCP
1
Enable
2
Disable
3 Up
Ok
4.2.5.3. Providing the IP-address
To set the
IP-address
of the selected interface, navigate to the
IP-address
input screen
and provide the desired address.
