ATOS Worldline
-
Technologies & Products
Page:
23/55
DEP/T6 Owner's Manual
(
04.01
)
Classification:
Public
Figure 4 –
Attaching the DEP/T6 with the rack mount brackets
1.
The screws are no t av ail abl e from At o s Worldlin e; o ft en
the y go with th e rack or, els e, you can obt ain them from a
hard ware st ore.
Not es :
2.
Dependin g on the rigidit y of th e rack posts , it m a y b e
reco mmend ed to put the DEP
/
T6 on a su p port pl at e.
3.2.2.
Attaching the chassis ground connection
Before you connect power or turn on the power to your DEP
/
T6, we strongly
recommend that you provide an adequate chassis ground (earth) connection for the
chassis. A chassis ground connector is provided on each DEP
/
T6 router chassis.
To ensure the chassis ground connection that you provide is adequate, you will need
the following parts and tools:
•
a grounding wire
•
a ring- or fork-shaped grounding lug
•
an M8 fork or ring spanner to release the nut of the grounding connector
This groun din g wi re is not avai lable from Atos Worl dline; yo u can
obt ain i t fro m a com merci al cabl e v end or.
Not e:
Use the following procedure to attach the grounding lug to the chassis ground
connector on the chassis of the DEP
/
T6:
1.
Make sure the lug is attached properly to the grounding wire,
2.
Release the nut of the chassis grounding connector at the rear of the DEP/T6
using an M8 spanner,
3.
Remove the nut and the toothed washer,
4.
Accommodate the lug to the chassis grounding bolt,
5.
Put in place the washer,
