53
After a few seconds, if the screen becomes like the one in Picture 85, it means that the WiFi card is
correctly enabled to the configuration:
Picture 85 – After having given the command “Configure”,
the screen that appears shows that the card is enabled to the configuration
If the visualized screen shows the message “RA_Config WiFi network is busy”, it means that the card is
not ready to receive the configuration data of the network; so wait a few minutes and repeat the
command “Configure”.
3.
In order to finish the procedure of configuration, use any device equipped with WiFi connectivity and
Web Browser (PC, smartphone and tablet);
4.
If you use a smart device (smartphone or tablet with WiFi port), go to point 6;
5.
Be sure that the WiFi card of the PC used is configured in DHCP (“get automatically an IP address”), as
shown in Picture 86:
Picture 86 – Check that the WiFi port of the PC is configured in DHCP
