ATON CLT 615 ISDN, Руководство пользователя

Страница: 39 / 53

38
Setting up the base
Aton CLT615ISDN / Swisscom EN / A31008-N3101-F151-2-2X43 / settings.fm / 18.02.11
V
e
rsion 4, 16.0
9
.2005
Using GSM mobile phones –
Link2mobile
You can make a call on your base and/or a
registered handset via the GSM connection
of your Bluetooth GSM mobile phone.
Prerequisites:
u
Bluetooth is activated on the base.
u
The mobile phone is connected to the
base ("activated"). Only one registered
GSM mobile phone can be activated/con-
nected at a time.
u
The mobile phone is in range of the base
(less than 10 m).
u
The mobile phone network connection is
assigned to the base as a send and
receive connection.
You can change the assignment via:
v
¢
Ï
Settings
¢
Telephony
¢
Send Connections/
Receive Connections
Activating registered mobile phones
v
¢
ò
Bluetooth
¢
Known Devices
q
Select a mobile phone.
(
μ
= activated))
§Options§
Press the display key.
Connect Mobile
Select and press
§OK§
.
When you register another mobile phone, it
is automatically activated. The previously
activated mobile phone is deactivated at the
same time.
Establishing a connection
A connection is automatically established
between the base and an activated mobile
phone in range:
u
If a call comes in on the GSM connection
of the mobile phone
u
If you try to make a call on the base via
the GSM connection (select GSM connec-
tion as send connection)
Making calls via the GSM connection
If the prerequisites are fulfilled, you can
make calls on your base via the GSM connec-
tion as described in the "Making calls" chap-
ter on page 26.
Setting up the base
Your base is preconfigured but you can
change the settings to suit your individual
requirements.
Accessing functions and
numbers quickly
You can program the six function keys on the
right-hand side of the base and the display
keys (in idle status). You can assign a phone
number (quick dial) or a base function to
each of these keys and change the assign-
ment.
The number is then dialled or the function
started by simply pressing a key.
Changing key assignments
In idle status:
¤
Press and hold the display/function key
until a list of possible key assignments is
displayed.
¤
Select a function or More Functions...
(provides additional functions) and
press
§OK§
.
Function key assignment: You can make a
note of the key assignment on the insert
strip next to the respective key (
¢
page 51).
Starting the function, dialling the
number
When the base is in idle status:
¤
Briefly press the function or display key.