24
First steps
Aton CLT615ISDN / Swisscom EN / A31008-N3101-F151-2-2X43 / starting.fm / 18.02.11
V
e
rsion 4, 16.0
9
.2005
Date/time
To ensure you have the correct time for incoming calls and to use the alarm clock
and calendar, the date and time must be set.
There are various methods of setting the date and time:
u
The base updates the date and time from the ISDN network the first time you
make an outgoing, external call.
u
You can also configure your base so that the date and time is transferred from a
time server on the Internet (at regular intervals).
Or you set the date and time manually on the base (see below).
You can activate/deactivate the synchronisation with a time server via the Web con-
figurator. Refer to the Web configurator's user guide on the enclosed CD.
Setting the date and time manually
If the date and time have not been set, the time will flash in the base's idle display
(00:00) and
§Time§
is displayed above the right display key.
¤
Press the key under
§Time§
on the display screen.
Enter day, month and year as an 8-digit number via the keypad,
e.g.,
Q4QO2Q
Q
for 04/09/2010. The displayed date is over-
written.
¤
Press down on the control key
s
, to scroll to the time entry line.
¤
Enter the hours and minutes in 4-digit format via the keypad,
e.g.,
QM
5
for 07:15 am.
¤
Press the display key
§Save§
to save the settings.
?
Time
