22
First steps
Aton CLT615ISDN / Swisscom EN / A31008-N3101-F151-2-2X43 / starting.fm / 18.02.11
V
e
rsion 4, 16.0
9
.2005
If handsets are already registered to the base, you are requested to assign send and
receive connections for the handsets. The following is shown in the display:
Assign connections to handset INT ...?
d.
¤
Press
down
on the control key
s
to switch to the next phone
number. Select either
Yes
or
No
as described above.
¤
Repeat the steps for each phone
number.
¤
Press the display key
§Save§
once
you have finished configuring the
settings for the base.
The updated list of receive connections is displayed one more time for you
to check.
Press the display key
§OK§
to confirm the assignment.
e.
The send connection currently set for
the base is displayed:
MSN1
.
¤
Press the display key
§OK§
, if you
do not wish to change the setting.
The following step is skipped.
¤
To change the setting, press the
display key
§Change§
.
f.
If the base is to make calls via a differ-
ent connection/phone number:
¤
Press
right
on the control key
v
repeatedly, until the required
connection is displayed.
¤
Press the display key
§Save§
to save
the settings.
INT 1
MSN1:
W
No
Receive calls for
MSN2:
f
Yes
g
V
Back
Save
Send Connection
Ð
INT 1
sends calls with
MSN1:
12345601
Change
OK
INT 1
Connection for
outgoing calls
f
MSN1
g
Back
Save
