23
First steps
Aton CLT615ISDN / Swisscom EN / A31008-N3101-F151-2-2X43 / starting.fm / 18.02.11
V
e
rsion 4, 16.0
9
.2005
¤
Perform steps a. to f. for each registered handset.
Subsequently, you are requested to assign the receive connections to the three
answering machines on the base. "
Assign connections to answering machine ?
"
¤
Perform steps a. to d. for each answering machine.
Please note:
Each connection may only be assigned to one of the three local
answering machines as a receive connection. If you assign a receive connection to
an answering machine and this connection is already assigned to another answer-
ing machine, the "old" assignment is deleted.
After successfully configuring the settings, you will briefly see the following display:
Completing the installation
This completes the installation. The following is shown in the display:
Afterwards, the base changes to idle status (for an example of the display in idle sta-
tus
The answering machines of the base to which you assigned a receive connection
are activated and switched on in answer and record mode with a standard
announcement (
Connection Wizard
‰
Connection
assignment
complete.
Setup
‰
Setup
complete