3
Calculation formula: recorded time (day) =
(! Note: For calculation of channel number, the program divides the channel number
into five options, namely 4, 8, 16, 32 and 64, and the bigger figure should be regarded
as the channel number for calculation in case the channel number of the instrument is
between the said two options. For example: If the channel number of the instrument is
12, then 16 should be adopted in the formula.)
Environment condition
Environment temperature: -10 ~ 50°C;
Relative humidity: 10 ~ 90% RH (without condensation of moisture);
Avoidance of contact of high corrosive gas.
(! Note: If the field environment is poor, special instruction should be given when
ordering.)
Working power supply
AC 85 ~ 264 V (power supply of the switches), 50/60 Hz;
DC12 ~ 36 V (power supply of the switches);
power consumption
≤
20 W.
III. Notes for Use and Installment
3.1 Notes for Use
3.1.1 Notes for Use of this Instrument
●
Please do not make charged goods close to signal terminals for it may result in failure.
●
Please do not bring charged items closely to signal terminals as it may result in failure.
●
Please do not shock this instrument.
●
If you confirm occurrence of such abnormal circumstances as smoke emission from the instrument,
smelling of peculiar smell, abnormal noise sent out by the instrument, etc., please cut off the power supply
immediately and contact the supplier or our company timely.
●
To ensure the instrument can operate normally, please power the instrument with electric machine for 30
minutes before using it.
3.1.2 Notes for Use of the External Storage Media
●
For storage medium is a kind of precision product, please take care in applications.
●
Except from inserting and removing the storage media, please close the operation cover in case of
operating. Contact with the dust should be reduced in terms of the storage media and the USB interfaces to get
protected.
●
Please take notice of static protection when using USB flash disk and SD card.
●
Products from our company are recommended.
●
When using the storage media under high temperature (above 40
°
C approximately), please insert the
storage medium at the time of saving data, remove it after the data are saved, and do not insert it in the instrument
for a long time.
●
Please remove the storage medium before opening/closing power supply.
●
For general notes for use of the storage media, please refer to the instruction manual attached by the used
storage medium.
3.2 Instrument Installment
3.2.1 Installment Site
Please install the instrument at the following sites.
●
Installment disk
Automation www.ato.com [email protected] Global Shipping +1 800-585-1519 (Toll-free)
Paperless Recorder
