OPERATOR AND SAFETY MANUAL
1NO0027UK-05
ZEBRA 12
23
Arm 2 up / down lever: this 2-position switch with a return to center allows to raise
or lower arm 1.
PUSH the lever to RAISE arm 2, and PULL the lever to LOWER it.
Telescope out / in lever: this 2-position switch with a return to center allows to
deploy or retract the telescope.
PUSH the lever to DEPLOY the telescope, and PULL the lever to RETRACT it.
JIB up / down lever: this 2-position switch with a return to center allows to raise or
lower the JIB (basket arm).
PUSH the lever to RAISE the JIB, and PULL the lever to LOWER it.
Horizontal leveling correction lever: this 2-position switch with a return to center
allows to correct the horizontal tilt angle of the basket to maintain the basket floor
horizontal, even if the machine moves on a slope or inclination. It can also be used
to fully fold the basket to set the machine to the « storage » position.
PUSH the lever to RAISE the basket, and PULL the lever to LOWER it
Basket rotation lever (rotator): this 2-position switch with return to centre allows
turning the basket to the left or right.
PUSH the lever to turn to the RIGHT, and PULL the lever to turn it to the LEFT.
3.2.2 LAMPS
Warns the operator that the engine alternator no longer charges (enough) the
battery.
This lamp is normally lit upon power on, but switches off in normal operation
(when the engine is running).
PREHEATING lamp (diesel engine):
Warns the operator that the diesel engine is being preheated. It is combined with
the engine start switch.
ENGINE OIL PRESSURE lamp:
Warns the operator that the engine oil pressure is abnormally low. If this lamp is
lit when the diesel engine is running, stop the engine IMMEDIATELY and check
the oil level (engine cold preferably). Add oil if required.
This lamp is normally lit upon power on, but switches off in normal operation (when the engine is
running).
ENGINE WATER TEMPERATURE lamp:
Warns the operator that the engine water temperature is abnormally high. If this
lamp is lit when the diesel engine is running, stop the engine IMMEDIATELY and
check the water level (engine cold preferably). Add water if required, and check the
lack of leaking on the radiator. The radiator may also be dirty, preventing proper engine cooling.
Содержание Zebra 12
