ATN Zebra 12, Руководство оператора и по безопасности

Страница: 21 / 45

OPERATOR AND SAFETY MANUAL
1NO0027UK-05
ZEBRA 12
21
4
Validation pedal (item Nr.4):
To perform elevation, rotation and translation movements, the
validation pedal must be maintained activated.
3.1.3 LAMPS
INCLINATION lamp:
This lamp, relayed by a sound alarm installed on the turret, warns the operator that the
machine reaches its limits of stability.
- NOTE-
When this lamp comes on, the machine is not stopped, but for safety reasons, the platform
must be returned to ground flat below 4°.
OVERLOAD lamp:
This lamp, relayed by a sound alarm installed on the turret, warns the operator that the
machine's basket is too loaded.
- NOTE-
When this lamp comes on, the machine is stopped. To resume normal functions, the basket
must be unloaded.
MACHINE FAULT lamp:
Warns the operator about an operation problem on the machine (system fault = lamp
lit steady). It flashes during the self-diagnostic procedure (check inputs to diagnose
electric failures).
FUEL LOW lamp:
Warns the operator that the quantity of fuel is critical. Fill up the tank as soon as
possible.
PREHEATING lamp (diesel engine):
Warns the operator that the diesel engine is being preheated. It is combined with the
engine start switch.