Atlas FAP62T, Каталог продукции

Страница: 6 / 124

AtlasSound.com
4
AtlasSound.com
FA62T-8MB 1480 70.7V:
2, 4, 8, 16, &
32 watts 50 watts 88 dB 63 Hz – 20 kHz (±5 dB)
(in FA97-6 Enc.) 6" Poly Cone Butyl Rubber
Surround FA95-8,
FA97-8
FAP40T
• Tuned & Ported Design for Extended Low Frequency Response
• 16 Watt Internal Transformer
• 8
Ω
Transformer Bypass Setting
• Low Profile Plastic Enclosure
• Input Via 2 Pole Terminal Block
• Press-fit Grille Blends Perfectly Into Contemporary Architecture
• Lightweight Construction Makes Use of Additional Support in Drywall Ceilings Unnecessary
• Tile Bridge Included
• Perfect Companion with the
FAPSUB Subwoofer System When Sub Bass is Required
• UL 1480
Designed to provide high performance in a very compact footprint, the FAP40T appeals to both system designers and
architects. FAP40T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and
institutional applications.
A unique tap selector switch design allows for easy system tuning. A full selection of taps up to 16 watts as well as
an 8
Ω
transformer bypass setting is included for maximum system versatility. This switch "knob" also functions as a
diffuser cone, providing smooth, even dispersion of the high frequency content from the center of the 4" polypropyl-
ene driver. The high frequency response of the
FAP40T
is so natural that many would assume that the driver in the
FAP40T
was a coaxial design instead of a single cone driver.
Low frequency response is enhanced by the tuned and ported enclosure design. The UL Listed enclosure is con-
structed of high impact injection molded plastic and includes a press fit grille design that blends well with contempo-
rary architecture.
A two pole terminal block housed below a metal removable cover on the back of the
FAP40T
enclosure allows for
easy system wiring as well as "daisy chain" wiring to other
FAP40T
s or even
FAPSUB
subwoofers (a great combina-
tion).
Accessories
A Tile Bridge is included in the package for suspended ceiling applications. The light weight design of the
FAP40T
coupled with the "Dog Leg" mounting system allows the
FAP40T
to mount into most drywall ceilings without the
need for a separate mounting ring.
For new construction drywall ceiling applications, the optional FA-TR4 trim ring is available. The FA-TR4 provides a
marked location for drywall installers to cut around essentially reserving the desired location in the ceiling until final
installation of
FAP40T . Mounting holes are provided to accommodate 16" or 24" OC stud / joist mounting.
The package includes an attractive press-fit grille, which nicely matches contemporary architecture.
The FAP40T includes a secondary support point built into the termination cover. This "ring" may be used with an
auxiliary support cable in drop tile installations.
Model UL Transformer
Taps
Power
Handling
Sensitivity Frequency Response Dimensions Optional New
Construction Trim Ring
FAP40T 1480 70.7V:
1, 2, 4, 8, &
16 watts /
8
Ω
Bypass
16 watts 87 dB 80 Hz – 15 kHz (±5 dB) Diameter:
7
3
⁄
8
" (187 mm)
Height:
7
1
⁄
8
" (181 mm)
FA-TR4
FAP40T Strategy Series
®
II 4" Speaker System
FAP40T
FAP40T
Tile Bridge Mounting System
(included)
FAP40T Ceiling Installation
FA-TR4
(optional)