Atlas FAP62T, Каталог продукции

Страница: 80 / 124

AtlasSound.com
78
AtlasSound.com
Common Features
• Available in the Most Popular Heights & Depths
• Designed With Contractor Input to Meet Storage and Wire
Management Needs for Today and Into the Future
• Rear Door Included as Standard
• 14-gauge Tops / Bottoms / Frames
• 16-gauge Side Panels
• Hat Sections are Completely Redesigned With Rail Slot
and Retainer Hole for Extra Strength
• Return Added for "Stop" When Flush Mount Doors are
Utilized
• Two Pairs of 12-gauge CRS Adjustable Mounting Rails
Plated, Drilled and Tapped 10-32 With Hash Marks to
Indicate Rack Unit Increments.
• Slots in Rack Rails for Cable Pass-Through and Front
Door Hinge Access (Surface Mount Doors)
• Leg Levelers Included as Standard
• Holes for Optional Surface Doors are Pre-Drilled &
Plugged
• Hat Sections Sized to Facilitate Standard 19" Panels
-Handy for Mounting "Stick-On" Modules and Other
Hardware
• Slots Maintained in Hat Sections for Wire Management
• Knock Outs on Removable Standard 2 RU Panels
(Rear of Cabinet Top & Bottom) Panel Includes
3
⁄
8
" KOs
for BNC Connectors (Perfect for Diversity Wireless
Systems)
• Increased Vent Space on Top Sections
• Stocked in Scratch Resistant Textured Black (-962)
• Wide Selection of Convenience, Cooling and Electronic
Accessories are Available
• 2 RU Panel on Bottom for Cable Pass-Through
Between Cabinets
• UL Listed (UL 1678)
G Series (Ganging) Specific Features (In Addition to Above)
• Lift–off, Locking Side Panels – "Swing-Out" Design Facilitates Easy Service Access
• Reinforced Stiffeners On All Side Panels
• Holes For Ganging Hardware Pass Through (Joins Racks)
FMA Series The new Atlas Sound FMA (Folded Metal Assembly) design incorporates an innovative "Radius" look
characterized by sleek corners and seamless joints. This new look blends effortlessly in today's ergonomically
designed office environment. A wider footprint of over 24" offers installers the luxury of more available working space,
particularly valuable in wire management applications where space is often inherently limited.
The Atlas Sound
FMA Series
features completely redesigned "hat" sections for added strength & greater versatility
in rack rail positioning. The hat sections include a rack rail slot along with holes spaced the entire length of the hat
section to allow for easy, secure positioning of the rack rails. This newly designed hat section is also spaced in the
cabinet to allow the installation of standard 19" blank panels vertically inside the cabinet. This is perfect for "stick-on"
type accessories like Atlas Sound DC power supplies & relays. Hat sections also feature slotted cut-outs for clean,
organized wire management.
For optimum wire management, unique, removable 2RU high panels are positioned behind cutouts at the top &
bottom on the rear of the cabinet. These panels include a variety of knockouts ranging in size from
3
⁄
8
" to 1
1
⁄
3
" to
facilitate rigid or flexible conduit.
3
⁄
8
" knockouts (x2) are also included on this panel to allow installation of BNC connec-
tors commonly used for diversity wireless microphone systems. The cabinet top sections offer large, vent openings
for maximum ventilation. This comes in especially handy when thermal sensitive amplifiers and/or digital rack mount
equipment are mounted in a FMA cabinet.
Leg levelers are included with the
FMA Series
at no additional cost to provide alignment regardless of floor even-
ness but in instances where maneuverability of the cabinet is required, an optional caster kit allows easy positioning
without significantly increasing the cabinet's overall height.
Cabinets include two pair (front / back) 11-gauge plated steel rack rails tapped 10-32 and include the new Atlas Sound
RU indicators to aid in aligning equipment during installation. Threaded inserts are included on the front of the cabinet
to save installation time when a front door is required.
Optional FMA series side panels "swing–out" for easy serviceability of equipment housed in the cabinet while main-
taining security. These heavily reinforced side panels install easily on unique "lift-off" hinge assemblies. All mounting
holes and cabinet hardware is provided to join multiple FMA G series cabinets.
All units feature 14-gauge steel tops / bottoms and frames. A flush mount 16-gauge steel rear door with integral "stop"
to prevent over-travel is included as standard.
Universal Accessories for FMA Series
Vertical Power Distribution Rack Mount Power Distribution Lacing Accessories
FMA Series Racks
FMA44-25G
(Shown with Optional
Front Door, Side Panels,
& Roller Truck)
FMA Series Accessories
EFT Series Fan Panels
FMA Roller Truck Kits
Optional Rear Rack Rails