Atlas APEX-10, Руководство по установке и эксплуатации

Страница: 38 / 75

Installation 38 Apex-10 / Apex-10H
7.12 Installation Of Power Unit (Ref. Fig. 24)
• Attach the power unit on the bracket on the
power side column;
• Secure it using nuts M10X20, the locking
washers D.10 and washers D. 10.
Figure 24
7.13 Connection Of Hydraulic Hoses
When routing the hydraulic hose, make sure that the hose is
clear of any moving part. Make sure to keep the hose inlets clean
from dust. Make sure not to over-tighten the hose fi ttings. This
may result in oil leakage.
• Clean the hoses and fi ttings;
• Inspect all threads for damage and make sure that all hose fi ttings are in
good condition;
• Install hose clamps and route the hoses referring to fi gure 25;
• Tighten the hose fi ttings thoroughly.