Atlas APEX-10, Руководство по установке и эксплуатации

Страница: 4 / 75

4 Apex-10 / Apex-10H
Operations and Maintenance Manual: 2-Post Lifts
Please read this manual in its entirety before installing or operating
your lift. By proceeding, you agree that you fully understand the
contents of this manual and the installation, operation, and maintenance
instructions contained within. Please deliver this manual to the lift
owner and/or operator along with all other documentation provided
with the lift. Failure to operate this equipment as intended may cause
injury or death.
Check for any freight damages. The shipment should be thoroughly inspected
as soon as it is received. The signed bill of lading is acknowledgement by the
carrier of receipt in good condition of shipment covered by your invoice. If any of
the goods called for on your bill of lading are shorted or damaged, do not accept
to unload until the carrier makes a notation on the freight bill of the missing
or damaged goods. Do this for your own protection. Check the contents of the
accessory and hardware boxes to make sure no parts are missing.
Important notice and operating conditions
• This lift is not intended for outdoor use. It is intended for indoor installation
only, with an operating temperature range of 41 – 104 °F (5 – 40 °C);
• Concrete fl ooring must be 4 ¼” minimum thicknesses with 3,000 psi. Do
not install on asphalt or other similar unstable surface type;
• Check ceiling height and electrical requirements as described in this
manual;
• Reference ANSI/ALI ALIS, Safety Requirements for Installation and Service
of Automotive Lifts;
• Consult a qualifi ed expert to address all seismic load concerns and other
local or state requirements;
• Atlas Automotive Equipment and its distributors will assume no liability for
loss or damage of any kind, express or implied, resulting from improper
installation, operation or maintenance of this lift.