Atlas APEX-10, Руководство по установке и эксплуатации

Страница: 55 / 75

Additional Information 55
Apex-10 / Apex-10H
Inspection and Maintenance
Please refer to the ANSI/ALI ALOIM – Current Edition “AMERICAN NATIONAL
STANDARD for Automotive Lifts – Safety Requirements for Operation, Inspection
and Maintenance”.
Periodic inspections and maintenance shall be performed only by trained lift
service personnel. Never operate a lift that is damaged or in disrepair. Proper
inspection and maintenance is necessary for the safe operation of the lift.
Contact a local service or factory representative immediately if any issues
arise or if you are not completely familiar with automotive lift maintenance
procedures.
Daily Procedures
• Check to ensure bolts are tightened;
• Check lift components and keep clean and free of debris;
• Check for oil leakage;
• Check all electrical components and wiring;
• Check cables and sheaves;
• Check all hydraulic lines and fi ttings;
• Repair or replace all damaged, defective, worn, frayed or broken
components immediately. Only use parts approved by the original
equipment manufacturer or parts meeting original manufacturer
specifi cations.
Monthly Procedures
• Check equalizer cable tension and adjust accordingly;
• Check lubrication points and lubricate accordingly;
• Check anchor bolts for tightness and appropriate torque;
• Check fl uid levels;
• Repair or replace all damaged, defective, worn, frayed or broken
components immediately. Only use parts approved by the original
equipment manufacturer or parts meeting original manufacturer
specifi cations.