Atlas Copco GA 11+, Инструкция

Страница: 149 / 152

13 Pressure equipment directives
Components subject to 2014/68/EU Pressure Equipment Directive
The following table contains the necessary information for the inspection of all pressure
equipment of category II and higher according to the Pressure Equipment Directive 2014/68/EU
and all pressure equipment according to the Simple Pressure Vessel Directive 2014/29/EU.
Compressor
type Component Description Volume Design
pressure Minimum and
maximum
design
temperature PED
Class
GA 11+ up to GA
30 1625 4815 01 Vessel 29 l 15 bar(e) -8 ˚C/ 120 ˚C -
0830 1010 03 Safety valve - - - IV
0830 1009 98 Safety valve - - - IV
0830 1009 87 Safety valve - 7.5 bar(e) - IV
0830 1010 02 Safety valve - 8.5 – 10
bar(e) - IV
0830 1009 89 Safety valve - 107 psi - IV
0830 1009 96 Safety valve - 132 psi - IV
Compressor
type Component Description Number
of cycles
(1) Minimum
wall
thickness Visual
inspection
frequency (2) Hydrostatic
inspection
frequency (2)
GA 11+ up to
GA 30 1625 4815 01 Vessel
2 x 10
6
2 mm 1 year 10 years
0830 1010 03 Safety valve - - - -
0830 1009 98 Safety valve - - - -
0830 1009 87 Safety valve - - - -
0830 1010 02 Safety valve - - - -
0830 1009 89 Safety valve - - - -
0830 1009 96 Safety valve - - - -
The compressors conform to PED smaller than category III.
(1) The number of cycles refers to the number of cycles from 0 bar(e) to maximum pressure.
(2) Other inspection techniques such as ultrasonic or X-ray are equivalent to hydrostatic testing
for this equipment.
Instruction book
2920 7118 31 147