Atlantis Splash Tech R60 2nd Stage, Руководство по обслуживанию

Страница: 19 / 42

The lever (20) should not be removed from the inlet tube unnecessarily. However, it can be
removed by carefully springing out one of the feet and pivoting it over the inlet tube. Do not
over-bend the lever legs. Straighten the legs if they are bent outward from parallel.
Remove and discard the LP seat (16) from the poppet (15).
Remove and discard the very small O-rings (14) from the poppet. This can be done by pinching
a section of the O-ring out of the groove with the fingernails. Then flip the O-ring off the end
of the poppet stem. DO NOT USE SHARP METAL PICKS! Metal tools will damage the O-rings
groove, which will cause a small continuous second stage leak.
Use an adjust tool to turn the orifice (22) counterclockwise enough turns to fully disengage
the threads from the inlet tube (18).