Keep the outdoor unit away from sources of heat or
LQÀDPPDEOHSURGXFWV&RQWDFW\RXUHQHUJ\GLVWULEXWRU
for the installation constraints.
Ensure that the appliance does not disturb neighbours
or users (noise level, draughts caused, low of the air
blown causing a risk of freezing plants in its path).
7KHVXUIDFHRQZKLFKWKHRXWGRRUXQLWLV¿WWHGPXVW
- Be permeable (earth, gravel bed...),
- Support the weight comfortably,
- Permit it to be solidly attached,
- Not transmit any vibration to housing (anti-vibration
posts are available as accessories).
The wall bracket can not be used in conditions likely to
transmit vibrations, ground position is preferred.
1000 mm
ou plus
200 mm
300 mm
200 mm
1000 mm ou plus
150 mm
150 mm
300 mm
Max. 500 mm
1000 mm
1500 mm
250 mm
250 mm
500 mm
Max. 500 mm
1500 mm ou plus
300 mm
500 mm
1500 mm ou plus
1500 mm
500 mm
Max. 300 mm
1500 mm
¿JXUH
Minimum installation clearance around the outdoor unit (three phase models)
Ensure that the connections can be made easily with
the hydraulic module.
The outdoor unit can be exposed to the weather,
however avoid installing it in places where it will
become dirty or have excessive water dripping onto it
(under a leaky drainpipe for example).
When operating water may escape from the outdoor
unit. Do not install the appliance on a terrace; install it
at a location which is drained (bed of gravel or sand).
If installed in a region where the temperature may be
below 0°C for a long period, check that the ice does not
cause any danger. It is also possible to connect a pipe to
evacuate to the outdoor unit (
¿JXUH
).
No obstacles must obstruct the circulation of
air through the evaporator and the fan outlet
(
single phase
¿JXUH
or three phase model
¿JXUH
).
Contact your
energy distributor
for the installation
constraints.
1000 mm
or more
1000 mm or more
1500 mm or more
1500 mm or more
Installation and commissioning instructions "1485 - EN"
- 17 -
Heat pump alféa hybrid duo gas
