Atlantic AEYC-0639U-AT, Руководство по установке

Страница: 35 / 68

- 35 -
►
List of function lines
Line Function Setting range or display
Setting
increment
Basic
setting
Time of day and date
1 U Hours / minutes 00:00... 23:59 1 --:--
2 U Day/Month 01:01... 31.12 1 --.--
3 U Year 1900... 2099 1 ----
5 S Start summer time (Day / Month) 01:01... 31.12 1 25.03
6
S
End summer time (Day / Month) 01:01... 31.12 1
25.10
The time change appears at 03h00 on the first Sunday after the date set.
User interface
20 U Language English, Français, Italiano, Nederlands... English
22 S Info Temporary, Permanent Temporary
26 S Operation locking Stop, Start Stop
27 S Programming locking Stop, Start Stop
44
I
Operation heating circuit 1
(heating circuit 2 command)
Common with heating circuit 1,
Independent
Common with
heating circuit 1
This function permits the choice to be made if the ambient sensor (in option) has an action on the two zones or on a single zone.
46 I Operation HCP
(domestic hot water pump command, output QX2)
Common with heating circuit 1,
Independent
Common with
heating circuit 1
If "Independent" see timer program 3 / HCP
70 S Version of display unit software
Time program heating, Circuit 1
500 U Pre-selection (day / week) Mon-Sun, Mon-Fri, Sat-Sun, Monday, ... ,
Saturday, Sunday
Mon-Sun
501 U 1
st
In service phase (start) 00:00... --:-- 10 min 06:00
502 U 1
st
Out of service phase (end) 00:00... --:-- 10 min 22:00
503 U 2
nd
In service phase (start) 00:00... --:-- 10 min --:--
504 U 2
nd
Out of service phase (end) 00:00... --:-- 10 min --:--
505 U 3
nd
In service phase (start) 00:00... --:-- 10 min --:--
506
U
3
rd
Out of service phase (end) 00:00... --:-- 10 min
--:--
516 U Standard values No, Yes No
Yes + OK: The default values memorised in the regulator replace and cancel the customised heating programs.
Your personal settings are therefore lost.
Time program heating, Circuit 2
Only with the 2
nd
circuit kit option.
520
U
Pre-selection (Day / Week) Mon-Sun, Mon-Fri, Sat-Sun, Monday, ... ,
Saturday, Sunday
Mon-Sun
521 U 1
st
In service phase (start) 00:00... --:-- 10 min 6:00
522 U 1
st
Out of service phase (end) 00:00... --:-- 10 min 22:00
523 U 2
nd
In service phase (start) 00:00... --:-- 10 min --:--
524 U 2
nd
Out of service phase (end) 00:00... --:-- 10 min --:--
525
U
3
nd
In service phase (start) 00:00... --:-- 10 min
--:--
526 U 3
rd
Out of service phase (end) 00:00... --:-- 10 min --:--
536 U Standard values No, Yes No
Yes + OK: The default values memorised in the regulator replace and cancel the customised heating programs.
Your personal settings are therefore lost.
Aurea M / Installation / 1883 - EN