- 5 -
2 3 Overall view of the installation
Your heat pump has been configured by your installer. It
is composed of the following main elements:
-The outdoor unit is positioned, as its name indicates,
outside of your residence and extracts energy from the
outdoor air
-The hydraulic unit positioned in your boiler room,
cellar, garage or even in your kitchen, transfers the
energy to the heating circuit
-The outdoor sensor detects the outdoor temperature
-The room thermostat(s)
The heat pumps are systems that can be connected
to any form of
low-temperature distribution
: the heat
captured by the heat pump can therefore be used in
different ways:
-Radiators
-
Heating (or cooling) floor systems.
-Dynamic radiators or fan-coil heaters
-Domestic hot water (DHW)
figure 1 - Overall view of the configuration of a complete installation
2 2 End of life of the device
The apparatus must be dismantled and recycled by a
specialised service provider
The apparatus must never be disposed of with
household waste, large objects or in a landfill.
When the apparatus reaches its end of life, please
contact you installer or the local representative in order
to proceed with the dismantling and recycling of this
apparatus
User manual "1634 - EN"
Loria 6000 heat pump
+
-
°C
mode
auto
reset
prog
man
or
Options depending
on the hydraulic
system configurations
The room
thermostat(s)
The outdoor
sensor
Optional controller
The cooling kit
The DHW kit
The 2-area kit
The outdoor unit
The hydraulic unit
The domestic hot water
tank with electrical back-up
The heating circuit:
floor heating
(cooling) system
Dynamic radiators or
fan-coil heaters
Radiators
