manualshive.com logo in svg

Aticio 816, Руководство по эксплуатации, Страница: 499 / 580

Поделиться
Скачать
Aticio 816 Скачать руководство пользователя страница 499

95

9. Remarks

This chapter describes how to maintain and operate the machine.

Where to Put Your Machine

This section provides precautions for installation, movement and disposal.

Machine Environment

Choose your machine's location carefully.
Environmental conditions greatly affect its performance.

Optimum Environmental Conditions

The following describes precautions when locating the machine.

R

 

CAUTION:

R

 

CAUTION:

R

 

CAUTION:

• Temperature: 10-32 

°

C (50-89.6 

°

F) (humidity to be 54% at 32 

°

C, 89.6 

°

F)

• Humidity: 15-80% (temperature to be 27 

°

C, 80.6 

°

F at 80%)

• Ventilation: 3 times/hr/person or more
• A strong and level base.
• The machine must be level within 5 mm, 0.2 inches: both front to rear and left

to right.

•

Keep the machine away from humidity and dust. Otherwise a fire or an elec-
tric shock might occur.

•

Do not place the machine on an unstable or tilted surface. If it topples over, 
an injury might occur.

•

After you move the machine, use the caster fixture to fix it in place. Other-
wise the machine might move or come down to cause an injury.

•

Make sure the room where you are using the machine is well ventilated and 
spacious. Good ventilation is especially important when the machine is used 
heavily.

Содержание 816





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов