manualshive.com logo in svg

Aticio 816, Руководство по эксплуатации, Страница: 432 / 580

Поделиться
Скачать
Aticio 816 Скачать руководство пользователя страница 432

Troubleshooting When Using the Facsimile Function

28

3

When You Cannot Send or Receive Fax 
Messages As Wanted

This section describes likely causes of and possible solutions for transmission
and reception-related problems.

❖

Transmission/Reception

❖

Transmission

Problem

Cause

Solution

Both transmission and 
reception are impossible.

The modular cable may be dis-
connected.

Make sure that the modular cable 
is correctly connected. See “Con-
necting the Machine to a Tele-
phone Line and Telephone”, 
General Settings Guide.

Both transmission and 
reception are impossible.

The terminal adaptor setting is in-
correct.

Check the setting.

Problem

Cause

Solution

Document appears 
blank at the other end.

The original was placed upside 
down.

Place it correctly. See “Placing 
Originals”, Facsimile Reference.

Transmission failed 
due to a “maximum e-
mail size” error.

The size of the Internet fax docu-
ment exceeds the maximum e-
mail size specified on the ma-
chine.

Set 

[

Maximum E-mail Size

]

 under 

[

E-

mail Settings

]

 to 

[

Off

]

, or set the 

maximum e-mail size to a larger 
value. Then, re-send the docu-
ment. See “E-mail Settings”, Gen-
eral Settings Guide.

LAN-Fax Driver does 
not work.

The entered login user name, 
password, or driver encryption 
key is incorrect.

Check your login user name, 
password, or driver encryption 
key, and enter them correctly. 
Contact the administrator.

LAN-Fax Driver does 
not work.

A high security level is set by the 
extended security function.

Contact the administrator.

Cannot cancel a Memo-
ry Transmission.

The document is being scanned.

Press the 

{

Clear/Stop

}

 key. See 

“Canceling a Transmission”, Fac-
simile Reference.

Cannot cancel a Memo-
ry Transmission.

The document is being sent or it is 
in standby.

Press the 

{

Clear/Stop

}

 key. See 

“Canceling a Transmission”, Fac-
simile Reference.

Cannot cancel an Im-
mediate Transmission.

-

Press  the 

{

Clear/Stop

}

 key. See 

“Canceling a Transmission”, Fac-
simile Reference.

Содержание 816





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов