Aticio 816 Скачать руководство пользователя страница 444

Страница: 444 / 580

Troubleshooting When Using the Printer Function

Alert Messages

This section describes the machine alert messages.

Message

Cause

Solution

Problem:Wire-

less card

An error may have occurred in
the IEEE 802.11b card.

Turn off the main power switch,
and back on again. If the message
appears again, contact your sales
or service representative.

Problem:Wire-

less board

An error may have occurred in
the IEEE 802.11b board.

Turn off the main power switch,
and back on again. If the message
appears again, contact your sales
or service representative.

Paper Tray is in

use.

The specified paper tray is in use
by another function, such as the
copier function.

Wait until the other function has
finished using the specified paper
tray.

Tray # Error

An error has occurred with the
paper tray.

# indicates the tray number.

Press

[

JobReset

]

to change the pa-

per tray settings, or press

[

Form-

Feed

]

to select another paper tray

and print using that.

USB Error

An error has occurred in the USB
interface.

Turn off the main power switch,
and back on again. If the message
appears again, contact your sales
or service representative.

Duplex mode is

in off position

for Tray #

The selected paper tray has not been
configured for duplex printing.

# indicates the tray number.

Press

[

JobReset

]

to change the pa-

per tray settings or do single-sid-
ed printing.

For details about the tray settings,
see “Tray Paper Settings”, Gener-
al Settings Guide.

Ethernet Board

Error

An error has occurred in the
Ethernet board.

Turn off the main power switch,
and back on again. If the message
appears again, contact your sales
or service representative.

NV-RAM Error

An error has occurred in the machine. Turn off the main power switch,

and back on again. If the message
appears again, call your sales or
service representative.

Authentication

failed.

• The login user name or pass-

word entered is incorrect.

• The machine currently cannot

perform authentication.

• Check your login user name

and password.

• Contact the administrator.

Parallel I/F Er-

ror

An error has occurred in the par-
allel interface board.

Contact your service representative.

Printer Font Er-

ror.

An error has occurred in the font
settings.

Turn off the main power switch,
and back on again. If the message
appears again, contact your sales
or service representative.

Содержание 816





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 816

Отзывы:

Aticio 816, Руководство по эксплуатации, Страница: 444 / 580

Результаты поиска

Содержание 816

Отзывы: