manualshive.com logo in svg

Aticio 816, Руководство по эксплуатации, Страница: 450 / 580

Поделиться
Скачать
Aticio 816 Скачать руководство пользователя страница 450

Troubleshooting When Using the Printer Function

46

4

Other Printing Problems

This section describes likely causes of and possible solutions for problems that
can occur when printing from a computer.

Problem

Cause

Solution

The print on the 
entire page is 
faded.

The paper is 
damp.

Use paper that has been stored in the recommended tem-
perature and humidity condition. See “Copy Paper”, 
About This Machine.

The print on the 
entire page is 
faded.

The paper is un-
suitable.

Use recommended paper. (Printing on coarse or treated 
paper might result in faint print image.) See “Copy Pa-
per”, About This Machine.

The print on the 
entire page is 
faded.

On the printer 
driver, under 

[

Print Quality

]

, 

[

Level Color

]

 is 

checked.

See the printer driver Help.

Printed images 
contain blots or 
are patchy.

Settings for 
thick paper 
have not been 
made when 
printing on 
thick paper.

• PCL 6/5e and PostScript3

Select 

[

Thick

]

 in the 

[

Type:

]

 list on the 

[

Paper

]

 tab.

• RPCS

Select 

[

Thick

]

 in the 

[

Paper type:

]

 list on the 

[

Print Set-

tings

]

 tab.

Printed images 
contain blots or 
are patchy.

Printing on 
coarse paper or 
treated paper 
can result in faint 
print image.

Use supplier-recommended paper. See “Copy Paper”, 
About This Machine.

Printed images 
contain blots or 
are patchy.

The paper is 
damp.

Use paper that has been stored in the recommended tem-
perature and humidity condition. See “Copy Paper”, 
About This Machine.

Printed images 
contain blots or 
are patchy.

Check the ma-
chine is set on a 
level surface. 
The machine 
must be placed 
on a stable and 
level surface. 

Check the environment of location to select an appropriate 
location. See p.95 “Where to Put Your Machine”.

Printed images 
contain blots or 
are patchy.

The paper is 
creased, curled, 
or has blemishes.

Smooth out the wrinkles from the paper, or replace it. See 
“Copy Paper”, About This Machine.

The image is too 
dark or too light.

The correct pa-
per type set-
tings are not 
made.

Check the paper loaded on the paper tray or bypass tray 
matches the paper type set on the display panel. See 
“Copy Paper”, About This Machine.

The image is too 
dark or too light.

The paper is 
loaded reverse 
side up.

Before printing on special paper, check its surface careful-
ly. Printing on non-print surfaces reduces print quality 
and can damage the machine's internal components. See 
“Copy Paper”, About This Machine. 

Содержание 816





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов