manualshive.com logo in svg

Aticio 816, Руководство по эксплуатации, Страница: 471 / 580

Поделиться
Скачать
Aticio 816 Скачать руководство пользователя страница 471

The Printer Function

67

6

Paper size/type mis-

match.

Change settings to:

xxx yyy

There is no paper tray that 
matches the paper settings se-
lected under Auto Tray Select.

xxx indicates the tray number.

yyy indicates the paper size 
and the paper type.

Press 

[

JobReset

]

 to change the 

paper tray settings, or press 

[

FormFeed

]

 to print regardless.

For details about paper tray 
settings, see “Tray Paper Set-
tings”, General Settings 
Guide.

[Print] without be-

low

mode?

This is an alert message con-
cerning a paper tray in auto 
tray select. 

Press 

[

Print

]

 to cancel the mode 

and print the job.

Printer Font Error.

An error has occurred in the 
font file.

Turn the main power switch off, 
wait a few seconds, and then 
turn it back on. If the message 
appears again, contact your 
sales or service representative.

Print overrun.

Image compression has result-
ed in image degradation.

Increase memory capacity. To 
install a memory module in 
the machine, contact your 
sales or service representative.

Paper Tray is in 

use.

The specified paper tray is in 
use by another function, such 
as the copier function.

Wait until the other function 
has finished using the speci-
fied paper tray.

Reset Paper Tray 

correctly.

The selected paper tray does 
not exist or is not set correctly.

Set the paper tray correctly.

D

Toner is almost 

empty.

Add toner.

Toner is running out.

Replace the toner cartridge 
soon to maintain print quality.

Tray # Error

A paper tray error has oc-
curred.

# indicates the tray number.

Press 

[

JobReset

]

 to change the 

paper tray settings, or press 

[

FormFeed

]

 to select another 

paper tray and print.

Unauthorized user 

access.

Print job canceled due to user 
restrictions.

Check the User Code permis-
sion status.

USB has a problem.

An error has occurred in the 
USB interface.

Turn the main power switch off, 
wait a few seconds, and then 
turn it back on. If the message 
appears again, contact your 
sales or service representative.

Message

Cause

Solution

Содержание 816





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов