manualshive.com logo in svg

Aticio 816, Руководство по эксплуатации, Страница: 470 / 580

Поделиться
Скачать
Aticio 816 Скачать руководство пользователя страница 470

Troubleshooting When Using the DDST Unit

66

6

Collate: Page max.

The maximum number of pages 
has been exceeded for collation.

Turn the main power switch 
off, wait a few seconds, and 
then turn it back on. Reduce 
the number of pages to be 
printed, or, increase memory 
capacity.

To install a memory module in 
the machine, contact your 
sales or service representative.

Duplex cancelled.

Duplex printing has been canceled. Check the paper used is suit-

able for duplex printing, or, in-
crease memory capacity. To 
install a memory module in 
the machine, contact your 
sales or service representative.

Duplex mode is in 

off position for 

Tray #

The selected paper tray has 
not been configured for du-
plex printing.

# indicates the tray number.

Press 

[

JobReset

]

 to change the 

paper tray settings or do sin-
gle-sided printing.

For details about tray settings, 
see “Tray Paper Settings”, 
General Settings Guide.

Ethernet Board Error

An error has occurred in the 
Ethernet interface.

Turn the main power switch off, 
wait a few seconds, and then 
turn it back on. If the message 
appears again, contact your 
sales or service representative.

Exceeded max. print 

size.

Press FormFeed/Jo-

bReset.

The page images to be printed 
exceed the maximum print area.

Press 

[

JobReset

]

 to change the 

paper tray settings, or press 

[

FormFeed

]

 to print regardless.

I/O buffer overflow.

The maximum size of the I/O 
buffer has been exceeded.

Increase the size of the I/O 
buffer through the Host Inter-
face menu.

Load paper in Tray #

There is no paper in the select-
ed paper tray.

# indicates the tray number.

Load the tray with paper.

NV-RAM Error

An error has occurred in the 
printer.

Turn the main power switch off, 
wait a few seconds, and then 
turn it back on. If the message 
appears again, contact your 
sales or service representative.

Output Tray changed.

The output tray has been 
changed due to the paper size 
limitation of the selected tray.

Select the correct output tray.

Message

Cause

Solution

Содержание 816





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов