ATI Technologies 100-505141 - Firemv 2200 128 MB PCIE Graphics Card, Руководство пользователя

Страница: 15 / 53

Detailed Installation 9
Display Configurations
The FireMV™ 2200 graphics card provides dual display functionality. The
following table lists the different ways you can connect displays to your
card.
Turning on the System
If you have properly installed your graphics card, operating system
messages will appear once the boot procedure is finished.
Your monitor will be running in a basic video mode. Higher refresh rates
are not available at this stage of the installation. Once you have installed the
FireMV™ 2200 drivers and software, you can use the Display Properties
control panel to adjust the video settings and configure multiple monitors.
Display
Configuration Connector(s)
Used Comments
Single CRT
display VGA connector
with DVI-I-to-VGA
adapter CRT- cathode ray tube analog
display.
The DVI-I connection can support a
CRT display using the DVI-I-to-VGA
adapter.
Single DFP
display DVI-I connector DFP - digital flat panel display.
DFP d
DFP Display DVI-I con
DVI-I connector
CRT d
DFP display VGA connector
with DVI-I-to-VGA
a
DVI-I connector
CRT d
CRT display VGA connector
with DVI-I-to-VGA
a
VGA connector
with DVI-I-to-VGA
adapter
L WARNING
- Turn on your monitor before you turn on your
computer. Failure to do so could damage your monitor.