ATI Technologies 100-505141 - Firemv 2200 128 MB PCIE Graphics Card, Руководство пользователя

Страница: 18 / 53

12 Installing Drivers and Software in Windows®
Installing Drivers and Software in
Windows®
You will need to install the FireMV™ 2200 drivers and software in the
following cases:
• After you have installed the card in your system.
• After you have reinstalled or upgraded your operating system.
This procedure applies to Windows® 2000 and Windows® XP.
Software Installation Prerequisites
To install or remove the drivers, you must have administrator rights or be
logged on as a user with administrator rights.
Your operating system must be installed and running before you can install
the FireMV™ 2200 drivers. You must also have Service Pack 1 (or higher)
for Windows® 2000 or Windows® XP installed.
Make sure your monitor cable is properly attached before you begin.
Note: The installation dialog will display in English if your operating
system’s language is not supported.
To install ATI drivers and software
1
Start your system. When the
Found New Hardware Wizard
comes up, click Cancel . When the System Settings Change
window asks you to restart your computer, click
No
.
2
Run the ATISETUP utility. The ATISETUP utility will start
automatically if you insert the ATI Installation CD-ROM into your
CD-ROM drive after the operating system has started. If your CD-
ROM auto-run is not enabled or the
ATISETUP utility does not start
automatically:
a) Click the Start button in the task bar.
b) Click Run .
c) Select
ATISETUP.EXE
from the root directory of the ATI
Installation CD-ROM.
d) Click OK .
3
Click Install under Software Install.
4
Click Next .
5
Click Yes to the license agreement. ATI Easy Install will start the
Installation Wizard.