Modular Matrix Solution User Manual
42
Serial Port Setting
To configure the VM1600’s serial port settings, select Serial Port Setting from
the Menu page.
Serial Port Address Setting
To set the VM1600’s serial port address, do the following:
1. Select
Serial Port Address Setting
from the Serial Port Setting submenu
by pressing
1
:
2. Press pushbuttons 1–16 to make your selection.
Note:
The default serial port address is 1. This address is used for RS422/
485 commands to control multiple VM1600’s.
3. Press
Menu
to return to the Menu page.
4. Press
Cancel
to return to the previous step without saving.
1: IP Seng
2: Serial Port Seng
3: Operaon Mode
4: Security Mode
1: Serial Port Address Seng : 1
2: Baud Rate Seng: 19200
3: Serial Port Mode: RS232
Serial Port Address : 1
