Chapter 3. Front Panel Operation
33
Port Switching
From the Main Screen, you can configure the Input-to-Output port connections
to associate an Input source device to an Output display.
Video / Audio Pushbutton
Before switching port connections, use the
Video
or
Audio
pushbuttons to
select whether to switch only the video or the audio signal exclusively.
Otherwise, both video and audio channels are configured together (default).
Press the
Video
* pushbutton to configure Video connections. The built-in
LED lights up and the LCD displays
Video
on the lower right side. Press
the button again to cancel.
Press the
Audio*
pushbutton to configure Audio connections. The built-in
LED lights up and the LCD displays
Audio
on the lower right side. Press
the button again to cancel.
If both
Video
and
Audio
built-in LEDs are turned off, the video and audio
channels are configured together and the LCD displays
V + A
.
Note:
Press the
Video
or
Audio
pushbutton to independently switch either
signal to a different source.
INPUT
OUTPUT
1 2 5 5* 1 1 3 4
1 2 3 4 5 6 7 8
INPUT
OUTPUT
1 2 5 5 1 1 3 4
9 10 11 12 13 14 15 16
V + A
P1
