ATEN VM0808HA, Руководство пользователя

Страница: 43 / 98

Chapter 3. Front Panel Configuration
31
Profile Pushbutton
The PROFILE pushbutton lets users conveniently switch between connection
profiles that have been saved or added to the Profile List (see Profile List ,
page 37).
When a Profile is in use, its profile number (P1–P16) is shown on the lower
right corner of the LCD display.
The Profile pushbutton functions as follows:
Š After pressing the Profile pushbutton, available profile numbers will light
up. The active profile number will flash. use the Input/Output pushbuttons
to switch to a specific profile (P1 to P16) or (P1 to P8). Note that:
Š
Input ports 1–8 correspond to Profile P1 to P8
Š Output ports 1–8 correspond to Profile P9 to P16 (where Output Port
1=Profile 9, Output Port 2=Profile 10... Output Port 8=Profile 16)
The selected pushbutton’s light flashes, and the VM0808HA immediately
applies the port connections configured in the selected profile. If the light
changes to a steady state, it means the profile is valid.
Š After pressing the Profile pushbutton, pressing it again will change to next
profile in Profile Scheduling (see page 40), not the profile list. This feature
is only available while a schedule is playing.
Š Press the Cancel pushbutton to exit
Note: If there are no profiles configured on the VM0808HA device, an error
message “
No Available Profile ” is displayed when the Profile
pushbutton is pressed.
A Profile’s port connections can be edited using the front panel pushbuttons
(see
Port Switching , page 17) or from the Connections page of the Browser
GUI (see Connection Profiles , page 42). Additionally, the Profile List can be
configured via the Profile page of the Browser GUI (see Profile List , page 37).
INPUT 1 2 5 5 1 1 3 4
OUTPUT 1 2 3 4 5 6 7 8
P1