ATEN VM0808HA, Руководство пользователя

Страница: 85 / 98

Chapter 5. RS-232 Commands
73
EDID Commands
You can set up which EDID mode the VM0808HA uses, select one of the 14
available ATEN default EDID configurations and copy the EDID of any
connected display to the input source with the following command:
EDID C Input + Num + C [Enter]
For example, to change EDID to use the port1 setting, type the following:
edid i 01 port01 [Enter]
The following tables show the possible values and formats for the commands:
Note: For the port and default command strings, the yy variable must be
entered for the command to work.
Command Description
edid Enable EDID selection
Input Description
i Implement the EDID of the
connected display to Port yy,
and pass it to the video source
(Note: yy: 01-08)
Num Description
xx Enable EDID selection
Control Description
portyy Implement the EDID of the
connected display to Port yy,
and pass it to the video source
(Note: yy: 01-08)
remix Implement the EDID of all
connected displays. The
VM0808HA uses the best
resolution for all displays
defaultyy Implements the specified
ATEN default EDID
configuration
(Note: yy: 00-17, default is 00)