Chapter 3. Front Panel Operation
21
Default IP Settings
To use / not use the VM0808H’s Default IP Settings, do the following:
1. Select Default IP Settings from the Set IP Port submenu. The cursor
flashes on the entry:
2. Turn the front panel IN tuner dial left or right to select Yes or No.
3. Press the OUT, IN, or ENTER pushbutton to confirm the change.
Save and Reset / Exit
After each operation, you are directed to the following page:
In this page, you can do the following:
When the arrow is in Save and Reset the Device, press the OUT, IN, or
ENTER to save all changes and restart the VM0808H; or
Select Exit without Save to ignore changes and return to the Menu; or
Press ESC to return to the previous step without change
ESC
ENTER
PROFILE
MENU
Gateway: 192.168.0.1
Default IP Setting: NO
OUT
IN
ESC
ENTER
PROFILE
MENU
Save and Reset the Device
Exit without Save
OUT
IN
Содержание VM0808H
