ATEN VM0808H, Руководство пользователя

Страница: 29 / 78

Chapter 3. Front Panel Operation
19
Menu Pushbutton
Use the MENU pushbutton to switch between the Main Screen and Menu
page.
From the Menu page:
Š
Turn the front panel OUT/IN tuner dial to cycle through the options
Š
Use the OUT , IN , or ENTER pushbutton to make a selection
Š
Press MENU or ESC to return to the Main Screen
Set IP Port
To configure the VM0808H’s IP port settings, from the Menu page, select Set
IP Port.
The submenu provides four options: IP Address, Subnet Mask, Gateway and
Default IP Settings.
IP Address
To set the VM0808H’s IP address, do the following:
1. Select IP Address from the Set IP Port submenu. The cursor flashes on the
first number:
2. Turn the front panel IN tuner dial left or right to cycle through and change
each number.
3. Turn the front panel OUT tuner dial left or right to move [ ] the cursor to
each position.
4. Press the OUT, IN, or ENTER pushbutton to confirm the IP address.
5. Press ESC to return to the previous step without change.
Note: The default IP address is 192.168.0.60
ESC
ENTER
PROFILE
MENU
Set IP Port
Set Serial Port
OUT IN
ESC
ENTER PROFILE
MENU
IP Address: 192.168.0.60
Subnet Mask: 255.255.255.0
OUT IN