ATEN VK0100, Руководство пользователя, Страница: 94 / 302

ATEN Control System User Manual
78
Getting Started Tasks
After you have installed and launched the ATEN Configurator, the Main Page
(page 80) appears. You will be guided to create and configure a project using
the 4 tabs in the Configurator’s interface, as illustrated below.
Hint: You can click the tabs to switch among different pages for configuration.
The steps below provides an overview of the getting started tasks.
1. In the Project tab, do the following.
Š Provide information about the ATEN controller that you have set up.
Š (Optional) Provide client information for the specified ATEN
controller.
Š Click Add Controller if you have more than one controller in the
environment.
For more details, see Project , page 88.
Click Start Project to proceed.
2. In the Device tab, do the following.
Š Connect each controller with its managed devices by adding them to
the controller’s Device Configuration list, enter the connection
settings, and specify the physical locations.
Š (Optional) Add another controller and/or Expansion Box to the project
by clicking
Add Controller or Expander .
Š Connect the Expansion Box with its managed devices by adding them
to the Expansion Box’s Device Configuration list.
For more details, see Device , page 90.
Click Design or the Viewer tab to proceed.