ATEN VK0100 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 302

ATEN VK0100 Скачать руководство пользователя страница 2

ATEN Control System User Manual

ii

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

FCC Caution:

Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

Warning

: Operation of this equipment in a residential environment could cause radio

interference.

KCC Statement

RoHS

This product is RoHS compliant.

Safety

This product has been classified as Information Technology Equipment.

«
1
2
3
4
...
»

Содержание VK0100















































































































































































































































































































Отзывы:

Нет отзывов