ATEN VK0100, Руководство пользователя, Страница: 176 / 302

ATEN Control System User Manual
160
Flag
Flags are created for control buttons to include parameters for when
settings are changed or requests are made to change settings on a
device. Flags indicate what the status is and what action to take according to
the value. Flags are added as actions to
Button Properties as a Condition or Set
Flag value.
Conditions tell a button to initiate associated actions if the flag value is true: “If
Flag equals Value ” initiate the action. Actions are associated with a condition
so that they only initiate if the flag value is correct. That way an ON command
is only sent to a device if the current flag value is OFF.
Set Flag changes the flag value when a device setting has changed. So that if a
device is OFF and the action turns the device ON, adding a “Set Flag 1 to ON”
will change the flag value to ON. Now the flag’s value matches the device
status so that actions associated with flag Conditions will initiate accordingly.
Create flags for a device and add them as a Condition and Set Flag value in the
Action – Button Properties (see Button / Slider Bar / Dial Kit Actions ,
page 134).
To create a Flag:
1. Select Flag and click
+
. The New Flag menu appears.
2. Enter a Name and select a radio button to set the flag value.
Š Select On/Off and use the drop-down menu to select the Default Value .
Š Enter a range (1-100) for the values in the two boxes and use the drop-
down menu to select the
Default Value . Use the drop-down menu to
select the format ASCII or HEX.