ATEN VK0100 Скачать руководство пользователя страница 53

Страница: 53 / 302

Chapter 2. Hardware Setup and Panel Oper

LED Indications

Refer to the table below for the status descriptions of a Control Pad indicated
by button LEDs.

Button LED Status

LED Activity

Control Pad Status

A button LED

lights orange

The Control Pad is powered on and the
button is currently off.

A button LED

lights white

The Control Pad is powered on and the
button is currently on.

A button LED

blinks orange and
white repeatedly

The function assigned to the button is
being executed.

All button LEDs

blink orange and
white once

The Control Pad is restoring its default
settings.

All button LEDs

blink orange and
white repeatedly

The firmware of the Control Pad is being
upgraded.

Содержание VK0100















































































































































































































































































































Результаты поиска

Содержание VK0100

Отзывы:

ATEN VK0100, Руководство пользователя, Страница: 53 / 302

Результаты поиска

Содержание VK0100

Отзывы: