ATEN VK0100, Руководство пользователя, Страница: 119 / 302

Chapter 4. ATEN Configurator (VK6000)
103
TCP, UDP, HTTP, and HTTPS. IP Address: Type to assign a fixed IP
address to the Ethernet device.
Š
Port: Type to assign a communication port.
Š
Username & Password: Type to set up the login/access credentials for
the device.
Note: A valid password should not start or end with a space and should
only contain upper-case alphabets, lower-case alphabets, numerals,
and/or special characters including
()~:-_
Š
Auth Type: Sets the authentication type that the device uses.
Š
Advance Settings: Click Advanced to display the Delay Interval setting.
Š
Delay Interval: Sets a time delay for each command before they are
sent to the device.
Š
Delay after Login (for telnet only): Sets a delay (to allow a connection
to be established) before the First and Second Commands are sent to
the device.
Š
Send command after connection (for telnet and TCP only): Sends
commands to the device after a successful connection has been
established.
Š
Format: Sets the command format.
Š
First Command: Sets the command.
Š
Second Command: Sets the second command.
Š
Automatically reconnect if no return message is received:
Select this option to continue reconnection attempts when no
return message is received from the device.
Š
Keep Connection Alive (for telnet and TCP only): The controller
sends a command to the device to maintain the connection and avoid
timeout issues.
Š
Command: Type a command to be sent to the selected device.
Š
Interval: Type the interval at which the controller sends the
command.