manualshive.com logo in svg

AT&T Partner II, Инструкция по установке и эксплуатации, Страница: 99 / 166

Поделиться
Скачать
AT&T Partner II Скачать руководство пользователя страница 99

MLS-6

Line/Programmable

Buttons (4)

Primary Line Button

Intercom Buttons (2)

MLC-6

Earpiece Volume
Control

Line/Programmable
Buttons

Primary Line Button

Intercom Buttons

Hold. Press to put a call on hold.

Spkr (Speaker) (all models except the MLC-6). Press to dial without lifting the handset. Turns on speaker and microphone (if available),
so you can have a conversation without lifting the handset.

Mic (Microphone) (MLS-34D, MLS-12D, and MLS-12 only). The light next to this button shows when the microphone is turned on; press
this button to turn off the microphone when you are using the built-in speaker. Leave on to use Hands-Free Answer on Intercom feature
(see Appendix B).

Message Indicator. Lights when someone signals you with the Message Light On feature.

Volume Control Buttons. Press 

▼  

to decrease or 

▲ 

to increase the volume of the ringer, speaker, and handset.

■

To adjust ringer volume, press 

▼ 

or 

▲ 

while the phone is idle and the handset is on the phone.

■

To adjust speaker volume, press 

▼ 

or 

▲ 

while listening to a call through the speaker.

■

To adjust handset volume, press 

▼ 

or 

▲ 

while listening through the handset.

On/Off (MLC-6 only). Turns the handset on and off, (You must turn the handset on to make calls.)
Status (MLC-6 only). Quickly updates the display on the MLC-6 handset.

Talk (MLC-6 only). Lights when handset is lifted and turned on.

Charge (MLC-6 only). Lights when handset is placed on the base and handset batteries are charging.

Using Telephones   

6-5

Содержание Partner II







































































































































































Отзывы:

Нет отзывов