AT&T EP5632 Скачать руководство пользователя | Manualshive

Страница: 112 / 119

background image

108

Appendix

Limited warranty

4. What is not covered by this limited warranty?
This limited warranty does not cover:

• PRODUCT that has been subjected to misuse, accident, shipping or other

physical damage, improper installation, abnormal operation or handling,
neglect, inundation, fire, water, or other liquid intrusion; or

• PRODUCT that has been damaged due to repair, alteration, or modification

by anyone other than an authorized service representative of the
manufacturer; or

• PRODUCT to the extent that the problem experienced is caused by signal

conditions, network reliability or cable or antenna systems; or

• PRODUCT to the extent that the problem is caused by use with non-AT&T

accessories; or

• PRODUCT whose warranty/quality stickers, PRODUCT serial number plates

or electronic serial numbers have been removed, altered or rendered
illegible; or

• PRODUCT purchased, used, serviced, or shipped for repair from outside the

United States of America or Canada, or used for commercial or institutional
purposes (including but not limited to products used for rental purposes);
or

• PRODUCT returned without valid proof of purchase (see item 6 below); or
• Charges for installation or setup, adjustment of customer controls, and

installation or repair of systems outside the unit.

5. How do you get warranty service?
To obtain warranty service in the United States of America, visit

www.telephones.att.com

or call

1 (800) 222-3111

. In

Canada, call

1 (866) 288-4268

. NOTE: Before calling for service,

please review the user’s manual - a check of the PRODUCT controls
and  features  may  save  you  a  service  call.  Except  as  provided  by
applicable  law,  you  assume  the  risk  of  loss  or  damage  during  transit
and transportation and are responsible for delivery or handling charges
incurred  in  the  transport  of  the  PRODUCT(s)  to  the  service  location.
The manufacturer will return repaired or replaced PRODUCT under this
limited  warranty  to  you.  Transportation,  delivery  or  handling  charges
are prepaid. The manufacturer assumes no risk for damage or loss of
the PRODUCT in transit. If the PRODUCT failure is not covered by this
limited warranty, or proof of purchase does not meet the terms of this
limited warranty, the manufacturer will notify you and will request that
you authorize the cost of repair prior to any further repair activity. You
must pay for the cost of repair and return shipping costs for the repair
of products that are not covered by this limited warranty.

«
...
110
111
112
113
114
...
»

Содержание EP5632
























































































































Отзывы:

Нет отзывов

Похожие инструкции для EP5632

Бренд: Nancy’s Knit Knacks Страницы: 2

Бренд: Duerkopp Adler Страницы: 70

Бренд: UnionSpecial Страницы: 80

Бренд: NexxTech Страницы: 5

Бренд: Unicum Страницы: 115

Бренд: Carina Страницы: 30

Бренд: Necci Страницы: 39

Бренд: Singer Страницы: 40

Бренд: BRONDI Страницы: 32

Бренд: DS Produkte Страницы: 68

GBC Ricoh StreamPunch Ultra

Бренд: ACCO Brands Страницы: 11

Бренд: JUKI Страницы: 44

KXTG9345 - HANDSET

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 4

KXTG2258S - 2.4 GHZ DIGITAL CDL

Бренд: Panasonic Страницы: 3

KXTG9348 - EXPANDABLE DIGITAL CORDLESS ANS SYS

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 14

Бренд: Panasonic Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды