AT&T EP5632 Скачать руководство пользователя страница 98

Страница: 98 / 119

Appendix

Troubleshooting

If you have difficulty with your telephone system, please try the suggestions
below. For Customer Service, visit our website at

www.telephones.att.com

or call

1 (800) 222–3111

. In Canada, dial

1 (866) 288-4268

I cannot pair my
cell phone to
the telephone
base.

• Make sure the Bluetooth function of your cellular phone is turned on.

See your cell phone user's manual for more information.

• Remove the

AT&T EP5632

from your cell phone's handsfree device

history list (see you cell phone user's manual for more information).

• Carefully follow the pairing instructions on page 23, making sure that

your cell phone is not connected to any other Bluetooth device(s).

• Turn off your cell phone, then turn it on again.
• Reset the telephone base. Unplug the unit’s electrical power. Wait

for approximately 15 seconds, then plug it back in. Repeat the above
suggestions.

I cannot pair my
headset to the
telephone base.

• Make sure that your Bluetooth headset is in discoverable mode when

pairing with the telephone base. See your headset user's manual for
more information on how to set your headset in discoverable mode.

• Carefully follow the pairing instructions on page 24, making sure that

your headset is not connected to any other Bluetooth device(s).

• Reset the telephone base. Unplug the unit’s electrical power. Wait

for approximately 15 seconds, then plug it back in. Repeat the above
suggestions.

I cannot
connect my cell
phone with the
telephone base.

• Make sure that the Bluetooth function of your cell phone is turned on.

See your cell phone user's manual for more information.

• Make sure that your Bluetooth cell phone is not connected to any other

Bluetooth device(s).

• Turn off your cell phone, then turn it on again.
• Make sure that your cell phone is connected and is on the

Active

Devices

list (page 27).

• For some cell phones, you must authorize the

AT&T EP5632

device in

your cell phone's Bluetooth feature. See your cell phone user's manual
for more information.

• Manually connect your cell phone to the

AT&T EP5632

. Refer to your

cell phone user's manual for more information.

I cannot connect
my headset with
the telephone
base.

• Make sure that your Bluetooth headset is not connected to any other

Bluetooth device(s).

• Make sure that your headset is connected and is on the

Active Devices

list (page 27).

Содержание EP5632
























































































































Результаты поиска

Содержание EP5632

Отзывы:

Бренды по названию

Популярные бренды

AT&T EP5632, Руководство пользователя

Результаты поиска

Содержание EP5632

Отзывы:

Бренды по названию

Популярные бренды