AT&T administration and, Руководство по установке и обслуживанию

Страница: 247 / 404

Assigning Stations
Dial Access to line
Pools
Use this procedure to assign stations dial access to line
pools. Refer to Form 1a, System Incoming Lines
for Release 3, or the System Configuration Form for
Feature Module 2 for proper assignments.
With a Display Console
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to
P.
Press Conference twice.
The administration menu appears.
Press [Station], [DialAcc]
.
Press the Auto Intercom button or dial the intercom
number for the station you want to assign dial access.
Press [Enter] .
.
Press the button of a line in each pool you want to
assign until your selection is shown.
Green light on = station has Dial Access to the pool containing the
line
Green light off= station does not have Dial Access to the pool
containing the line
If you want to give another station the same line
assignments as one you have already set up, use the
following shortcut:
CAUTION:
Be aware that when you copy line
assignments, you also copy call restrictions,
allowed list and disallowed list permissions. Be
sure you want the two stations to be identical in
these respects before using this copy procedure.
a Press
[Copy]
.
b Press the Auto Intercom button or dial the intercom
number of the station you are copying from.
Administering a New System
3-39