GB 26
SYMPTOOM
POSSIBLE CAUSE
SOLUTION
The display will keep on
flashing after you have
switched on a cooking zone.
The pan you are using is
not suitable for induction
cooking. or has a diameter
smaller than 12 cm.
Use a suitable pan, see (refer
to pages 12 and 13).
A cooking zone suddenly
stops working and a beep can
be heard.
The set timer time has passed. Switch off the beep by
pressing any button.
The hob is not working and
nothing appears in the display.
There is no power supply due
to a defective cable or a faulty
connection.
Check the fuses or the electric
switch (if there is no plug).
A fuse blows as soon as the
hob is switched on.
The hob has been wrongly
connected.
Check the electrical
connections.
The hob switches off without
warning.
You have accidentally pressed
the on/off button or operated
two buttons simultaneously.
Switch the hob back on.
Fault code ER22.
The control panel is dirty or
there’s water on it.
Cleaning the control panel.
Fault code E2.
The hob has overheated.
The hob has been switched off
due to overheating. Let the
hob cool down and then use
a lower setting.
Fault code U400
Voltage too high and/or not
connected properly.
Have your connection
changed.
Fault code .
You have operated a button
too long.
Do not operate the buttons
too long.
Other fault codes.
Defective generator.
Contact the service
department.
General
TROUBLESHOOTING
