GB 15
Settings
Boost
You can use the ‘boost’ function to cook with the highest possible
power during a short period of time (maximum of 10 minutes).
After the maximum boost time the power will be reduced to setting 9.
Switching on the boost function
The hob is switched on and there’s a pan on a cooking zone.
1. Press
. (This is also possible if a power has already been set).
2. Press the
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
or
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button of the desired cooking zone.
‘P.’ will appear on the display. The boost function will be activated
immediately.
In case the
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
or
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button isn’t pressed, the red light to the right top
will flash for 3 seconds and then go out. A single beep will be
heard.
Switching off the boost function
The boost function is switched on,
‘P’ is visible on the display.
1. Press the
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button.
Power setting 9 will appear on the display , the boost function is
switched off.
Or:
2. Simultaneously press the
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
or
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button.
Setting ‘0.’ will appear on the display, the cooking zone is switched off.
Two cooking zones one in front of the other
Two cooking zones one in front of the other effect each other.
When both of these cooking zones are switched on at the same time,
the power is automatically shared between them. Up to setting 9
this has no consequences. However, when you set a cooking zone to
the boost setting, the other cooking zone will be set to a somewhat
lower setting.
If a cooking zone is set at boost and you want to set the other one
to setting 9, the cooking zone with boost will automatically go to
a lower setting.
Two cooking zones alongside each other have no effect on each other.
You can set both cooking zones on a high setting.
OPERATION
