Fitting the hob
Above a drawer or fixed decorative trim. Above a 60 cm ATAG oven.
Above an oven of another make with casing cooling.
Ensure that there is a space of at least 10 mm between a drawer and the
hob. Take care that the drawer cannot put any mechanical pressure on the
connection cable.
Make an opening in the side wall of the kitchen cupboard for leading the
connection cable through (for building-in in combination with an oven).
This is necessary when the plug can no longer be reached after building in.
Wall socket and plug must be accessible at all times.
A certain height under the worktop is necessary if the hob is installed
above an oven. This height under the worktop depends on the following:
– Worktop
thickness;
– Installed height of the hob (see table);
– Height of oven at highest point (not including the operating panel).
The required height under the worktop is the height of the oven at
the highest point plus the installed height of the hob less the worktop
thickness.
INSTALLATION GUIDE
build in HL62..E
Height of oven
at highest point
Worktop thickness
Installed height
of the hob
Height under
the worktop
80
