ATA SAPHIR 550, Руководство по эксплуатации

Страница: 15 / 42

»SAPHIR 550/560
Operating Manual
GmbH
- 15 - Stand: 03.02.2020
2.2.6 Process parameters
1 Program duration
2 Single/Central pressure (see 2.2.6.1)
3 Downward pressure
4 Grinding to abrasion (only possible in central pressure) (see 2.2.6.2)
5 Desired abrasion
6 rpm working wheel
7 Rotational direction sample holder (see 2.2.6.4)
8 rpm sample holder
9 System settings (see 2.4)
10 Bring out pistons manually (see 2.2.6.5)
11 Manual rotating of the sampleholder (see 2.2.6.6)
12 Water (see 2.2.6.3)
13 Working wheel cooling (see 2.2.6.7)
14 Machine illumination
2.2.6.1 Single/Central pressure
Single pressure:
Central pressure:
If this mode is switched over, then the sample holder head must also be correctly set, because the force for downward
pressure has to be re-calculated accordingly.
2.2.6.2 Grinding with time/abrasion
If grinding with abrasion is deactivated, then the process is grinding/polishing with time. The sequence runs so long
until the preset time has ended.
If grinding with abrasion is activated, then the automatic process runs only so long, until the preset abrasion is
reached or the preset time has ended. This way it can be assured that a grinding sequence does not run unendlessly.
The time should be set so far, that the preset abrasion is also reached at the same time.
1
2 3
4 5
6
7 8
9 10
11
12
13 11