manualshive.com logo in svg

Asus Z7S WS - Motherboard - SSI CEB, Руководство пользователя, Страница: 151 / 156

Поделиться
Скачать
Asus Z7S WS - Motherboard - SSI CEB Скачать руководство пользователя страница 151

ASUS Z7S WS

5-41

5.5 

Creating a RAID driver disk

A floppy disk with the RAID driver is required when installing Windows

®

 XP 

operating system on a hard disk drive that is included in a RAID set. For  

Windows

®

 Vista operating system, use either a floppy disk or a USB device with 

the RAID driver.

5.5.1 

Creating a RAID driver disk without entering the OS

To create a RAID/SATA driver disk without entering the OS:
1.  Boot your computer.
2.  Press <Del> during POST to enter the BIOS setup utility.
3.   Set the optical drive as the primary boot device.
4.   Insert the support DVD into the optical drive.
5.  Save changes and exit BIOS.
6.   Press any key when the system prompts “Press any key to boot from the 

optical drive.”

7.   When the menu appears, press <1> to create a RAID driver disk.

8.   Insert a formatted floppy disk into the floppy drive then press <Enter>.

9.   Follow succeeding screen instructions to complete the process.

5.5.2 

Creating a RAID/SATA driver disk in Windows

®

To create a RAID driver disk in Windows

® 

environment:

1.   Start Windows

®

.

2.   Place the motherboard support DVD into the optical drive.
3.  Go to the 

Make Disk

 menu, then select the RAID driver disk you wish to 

create:
•  Click 

Intel(R) ESB2 AHCI/RAID 32bit/64bit Driver

 to create an Intel

®

 

ESB2E AHCI/RAID driver disk for a 32bit/64bit system.

•  Click 

JMicron JMB36X 32bit/64bit SATA/RAID Driver

 to create a 

JMicron

®

 JMB36X driver disk for a 32bit/64-bit system.

4.   Insert a floppy disk/USB device into the floppy disk drive/USB port.

5.   Follow succeeding screen instructions to complete the process.

Write-protect the floppy disk to avoid computer virus infection.

Содержание Z7S WS - Motherboard - SSI CEB





























































































































































Отзывы:

Нет отзывов