Asus Z7S WS - Motherboard - SSI CEB Скачать руководство пользователя страница 140

Страница: 140 / 156

5-30

Chapter 5: Software support

5. Use the up/down arrow key to highlight the drive you want to set, then press

<Space> to select. A small triangle marks the selected drive. Press <Enter>

after completing your selection.

6. When the Stripe Size item is highlighted, press the up/down arrow key

to select the stripe size for the RAID 5 array, then press <Enter>.

The available stripe size values range from 4 KB to 128 KB. The default

stripe size is 64 KB.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9. Press <Y> to create the RAID volume and return to the main menu or <N> to

go back to the Create Volume menu.

TIP: We recommend a lower stripe size for server systems, and a higher stripe

size for multimedia computer systems used mainly for audio and video editing.

7. Key in the RAID volume capacity that you want, then press <Enter> when

the Capacity item is highlighted. The default value indicates the maximum

allowed capacity.

8. Press <Enter> when the Create Volume item is highlighted. This warning

message appears.

Содержание Z7S WS - Motherboard - SSI CEB





























































































































































Результаты поиска

Содержание Z7S WS - Motherboard - SSI CEB

Отзывы:

Asus Z7S WS - Motherboard - SSI CEB, Руководство пользователя, Страница: 140 / 156

Результаты поиска

Содержание Z7S WS - Motherboard - SSI CEB

Отзывы: